Addressable Zone Monitor Module

I-9319 intelligent zone monitor unit is an Addressable Zone Monitor Module, which will integrate conventional detectors or conventional manual call points to addressable system. When any of the connected devices alarms are active, the unit can send the alarm message to fire alarm controller, which generates alarm signal and displays its address. The unit can match with the conventional optical smoke detector, conventional rate of rise and fixed temperature detector and conventional manual call point etc. It has the function of checking short or open circuit of the output connection, by the End of Line Resistor (EOLR) or Active End of Line unit (AEOL recommended). The fault massage includes open circuit, short circutor any removal of the detectors. Electronic addressing can be done through Hand held Programming tool (P-9910), purchased separately.

Features and Benefits:

•  Interface with conventional fire non-addressable unit
•  Secure and speedy communication
•  Monitored cable
•  Electronically addressed
•  LED status indicator
•  Ideal for integrating Sprinkler Zone Valve and Flow Switches, Addressable Zone, Monitor Unit

Technical Specifications:

•  Protection rating: IP 30
•  Application: Zone input
•  Capability: 15 conventional detector ( AEOL)
•  End of Line: 4.7K
  or AEOL
•  Operating Current:Loop: Standby=0.5mA; Alarm=10m APSU: Standby=5 mA; Alarm=60mA Operating Voltage:Loop: 24V (16V~28V)PSU: 24VDC (20VDC~28VDC)
•  Operating temp: -10°C to +50°C
•  Relative humidity: 95%
•  Addressing: 1 to 242 using P-9910B
•  Application: Indoor use
•  Visual Indicator: LED, steady red when in alarm state, 3sec interval blinking at normal state; Yellow (fault)
•  Material and colour: ABS, off-white
•  Wiring: 6 wires: 2 wire for loop ( non-polarized) ; 2 wire for power cable( non-polarized) ; 2 wire for output/input
•  Dimensions: 120mm x 80 mm x 39 mm Mounting.

Additional Information:

• Item Code: I-9319