Addressable Multi Sensor

Addressable Multi Sensor  all the features of the I-9102 Optical and the I-9103 Dual Heat Detectors the unit provides an ideal solution for life and safety systems. Ideally suitable for application in data processing area including telephone exchange, conference rooms, indoor markets or shops, dining area, factory, recording studio and libraries etc. Aesthetically pleasing with a low profile design, unobtrusive to complement modern building designs. The unit incorporates an intelligent processor that provides Algorithm map, Built-in A/D converter, Drift compensation, Self Diagnosis and history log. The integral microprocessor analyses the signal according to the factors such as signal strength and rate of increase, then confirms these pattern with the pre-programmed fire scenarios and smoke patterns for a faster and safer response. By intelligent analysis, the smoke detection sensitivity will be automatically adjusted according to temperature change, providing a rapid response. Secure and speedy communication through the on board process or enables the detector to make its own decision, resulting in greater automation. The sensor and the panels utilized fuzzy logic providing an almost limitless cause and effect scenarios. Drift compensation, to monitor for the long term changes caused by aging, humidity, temperature, dust, etc. constant monitoring and self adjusting, the I-9101 updates sensitivity base line for its sensing element. Even when the detector raises a warning advising that it requires cleaning, the sensitivity remains the same as the day it was installed. Electronic addressing can be done through Hand held Programming device (P-9910B), purchased separately. Intelligent Multi SensorI-9101

Features and Benefits:

•   Built in 8 bit microprocessor
•   Algorithm maps for faster response and false alarm rejection
•   Analogue sensing  Secure and speedy communication
•   Patented Linear Drift compensation
•   Self diagnosis and history log
•   Electronic addressing
•   Sensing chamber for exceptional dust proof ability
•   Twin LED for 360º vision
•   Low profile design
•   Ideal alternative to Ionization detector

Technical Specifications:

•   Standard: EN54-part 5 and Part 7
•   Protection rating: IP 23
•   Operating voltage: 24Vdc Loop voltage
•   Operating Current:Standby current 0.6m Alarm Current 2mA/5mA
•   Operating temp:-10°C to +50°C
•   Relative humidity: 95%
•   Application: Indoor use
•   Detecting range recommended: 50 Sq.m. for normal area;and 20 sqm for high risk
•   Visual Indicator: twin LED, Red ( lit steady when alarm, 3sec interval blinking at normal state)  Material and colour: ABS, white (RAL 9016)
•   Wiring: 1 pair non polarized
•   Dimensions: diameter 10cm; height 5cm

Additional Information:

• Item Code: I-9101